Honeywell 15mm Thermostatic Mixing Valve

Product Code TMV200/15

Thermostatic Blending Valve 15mm valve

These valves are very important if a concern for scalding applies. by blending the hot water with cold water at taps maximum temperature can be set not exceeding 44 dg C

TM200 thermostatic mixing valves provide control of the water temperature and are used: - For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. - In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets.

• Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates 
• Simple setting of the required water temperature 
• Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixed water setting 
• The cold water inlet is automatically cut off if the hot supply fails 
• Inner components are of scale-resistant materials