Product Code IR3-1950
Herschel Advantage IR3 Space Heating
IR3 1950Watts Ceramicx
-
760mm x 100mm x 170mm
-
1950Watts
-
12m2
The Herschel Advantage IR 3 consists of 3 high-emission ceramic heating elements mounted in a directional, reflective unit. It is designed to gently warm people indoors using infrared radiated heat. Infrared heat is emitted from the hot surface of the ceramic heaters and warms the body directly without heating the air in between. As soon as the heater is switched on the ceramic elements start to warm up and full operating temperature is achieved in less than 10 minutes. As the energy produced is all in the low medium to far infrared region (not visible), there is no light emitted from the heater, but elements can produce a very faint orange glow.The Herschel Advantage IR3 must be located in a position to allow for proper and efficient use but one that ensures hot parts are not touched accidentally. The recommended height for the mounting is 2.3m to 2.5m (90”-98”) from ground level, with the heaters angled down at 60 degrees. The Herschel Advantage IR3 MUST NOT be installed at a height of less than 2.3m (90”). Consideration should be given to any temporary or occasional additions such as stages or platforms, and the height should be adjusted accordingly. The Herschel Advantage IR3 should be firmly and permanently attached to the wall.
The Herschel Advantage IR 3 is an ideal workshop heater for commercial and workspace applications. This wall-mounted unit is designed for spaces with walls giving adequate clearance from the ground (2.3 – 2.5m) and from the ceiling above (minimum 0.3m). With a power output of 1950 watts, these low watt-density heaters are optimised to produce far greater levels of comfort compared with hot air or gas-burning “space ray” type heating systems or other forms of electric heating often used in these environments. There are additional benefits:
- As there are no exhaust emissions there is no requirement for planning;
- They operate silently and without fumes – consequently raising no health and safety issues;
- Installation is much cheaper than oil or gas alternatives – all you require is electric cable;
- No maintenance. You do not have to maintain an infrared heater once installed;
- You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted;
- Far Infrared has been shown to have positive effects on metabolism, being the waveband at which water (80% constituent of skin) most effectively absorbs heat.
Space heating can be used anywhere there is a requirement to heat a large volume and where the heaters themselves can be placed well out of reach. So workplaces like workshops, industrial or commercial units, warehouses etc make ideal locations for heaters of this sort.
Any orders below £100 subject to £8.33 carriage
- Stock:
- Model: IR3-1950
- SKU: IR3-1950
- MPN: IR3-1950