Product Code TMV200/15
Thermostatic Blending Valve 15mm valve
These valves are very important if a concern for scalding applies. by blending the hot water with cold water at taps maximum temperature can be set not exceeding 44 dg C
TM200 thermostatic mixing valves provide control of the water temperature and are used: - For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. - In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets.
- Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates
- Simple setting of the required water temperature
- Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixed water setting
- The cold water inlet is automatically cut off if the hot supply fails
- Inner components are of scale-resistant materials
Any orders below £100 subject to £8.33 carriage
- Stock:
- Model: TMV200/15
- SKU: TMV200/15
- MPN: TM200VP34E